求房屋外墙的散热热流密度 q 以及它的内外表面温度 t_(mathrm{w1)} 和 t_(mathrm{w2)}。已知:墙壁厚度 delta=360mathrm(mm),室外温度 t_(mathrm{d2)}=-10^circmathrm(C),室内温度 t_(mathrm{d1)}=18^circmathrm(C),墙的 lambda=0.61mathrm(W)/( mathrm(m) cdot mathrm(K)),内壁的表面传热系数 h_(1)=10mathrm(W)/( mathrm(m)^2 cdot mathrm(K)),外壁 h_(2)=16mathrm(W)/( mathrm(m)^2 cdot mathrm(K))。已知该墙高 2.8mathrm(m),宽 3mathrm(m),求它的散热量 Phi?

求房屋外墙的散热热流密度 $q$ 以及它的内外表面温度 $t_{\mathrm{w1}}$ 和 $t_{\mathrm{w2}}$。已知:墙壁厚度 $\delta=360\mathrm{mm}$,室外温度 $t_{\mathrm{d2}}=-10^{\circ}\mathrm{C}$,室内温度 $t_{\mathrm{d1}}=18^{\circ}\mathrm{C}$,墙的 $\lambda=0.61\mathrm{W}/( \mathrm{m} \cdot \mathrm{K})$,内壁的表面传热系数 $h_{1}=10\mathrm{W}/( \mathrm{m}^{2} \cdot \mathrm{K})$,外壁 $h_{2}=16\mathrm{W}/( \mathrm{m}^{2} \cdot \mathrm{K})$。已知该墙高 $2.8\mathrm{m}$,宽 $3\mathrm{m}$,求它的散热量 $\Phi$?

参考答案与解析:

相关试题

16.已知两平行平壁,壁温分别为T_(w1)=50^circC,T_(w2)=20^circC,系统辐射系数C_(1,2)=3.96,求每平方米的辐射传热量(W/m²)。若T_(w1)增加到200℃,

16.已知两平行平壁,壁温分别为T_(w1)=50^circC,T_(w2)=20^circC,系统辐射系数C_(1,2)=3.96,求每平方米的辐射传热量(W

  • 查看答案
  • 20^circ mathrm(C) 时汞的表面张力为 4.85 times 10^-1 , mathrm(J) cdot mathrm(m)^-2,求在此温度及 101.325 , mathrm(kP

    20^circ mathrm(C) 时汞的表面张力为 4.85 times 10^-1 , mathrm(J) cdot mathrm(m)^-2,求在此温度及

  • 查看答案
  • 已知反应mathrm(N)_2 + 3mathrm(H)_2 = 2mathrm(NH)_3的Delta_r H_m^ominus = -92.22 , mathrm(kJ) cdot mathrm(

    已知反应mathrm(N)_2 + 3mathrm(H)_2 = 2mathrm(NH)_3的Delta_r H_m^ominus = -92.22 , mat

  • 查看答案
  • 根据如下数据,求 mathrm(H)_2mathrm(O)(mathrm(l)) 在 298 mathrm(K) 时解离成 mathrm(H)^+ 和 mathrm(OH)^- 并达到平衡时的解离度和

    根据如下数据,求 mathrm(H)_2mathrm(O)(mathrm(l)) 在 298 mathrm(K) 时解离成 mathrm(H)^+ 和 math

  • 查看答案
  • 某平面,内表面温度t1,外表面温度t2,导热系数λ,壁厚δ,热流密度q.当内表面温度变为2t1,外表面温度变为2t2,其他条件不变时,热流密度变为 q.

    某平面,内表面温度t1,外表面温度t2,导热系数λ,壁厚δ,热流密度q.当内表面温度变为2t1,外表面温度变为2t2,其他条件不变时,热流密度变为 q

  • 查看答案
  • 氧气由 t_1 = 40^circ mathrm(C)、p_1 = 0.1 mathrm(MPa) 被压缩到 p_2 = 0.4 mathrm(MPa),试计算压缩 1 mathrm(~kg) 氧气消

    氧气由 t_1 = 40^circ mathrm(C)、p_1 = 0.1 mathrm(MPa) 被压缩到 p_2 = 0.4 mathrm(MPa),试计算

  • 查看答案
  • 游离mathrm(SiO)_2含量W

    游离mathrm(SiO)_2含量WA. 4B. 3C. 2.5D. 1

  • 查看答案
  • 图为弯管机的夹紧机构示意图,已知:压力缸直径mathrm(D)=120mathrm(mm),压强mathrm(p)=6mathrm(MPa),各构件重量和各处摩擦不计。求角mathrm(theta )

    图为弯管机的夹紧机构示意图,已知:压力缸直径mathrm(D)=120mathrm(mm),压强mathrm(p)=6mathrm(MPa),各构件重量和各处摩

  • 查看答案
  • (mathrm{H)}_(3)(mathrm{PO)}_(4)的mathrm(PKa)1、mathrm(PKa)2、mathrm(PKa)3分别为2.12、7.20、12.4,当(mathrm{H)}

    (mathrm{H)}_(3)(mathrm{PO)}_(4)的mathrm(PKa)1、mathrm(PKa)2、mathrm(PKa)3分别为2.12、7.

  • 查看答案
  • 预测下面反应的主产物并解释。mathrm(H)_2mathrm(C)=mathrm(C)(mathrm(CH)_3)_2 + mathrm(Br)_2 xrightarrow(mathrm{NaCl)

    预测下面反应的主产物并解释。mathrm(H)_2mathrm(C)=mathrm(C)(mathrm(CH)_3)_2 + mathrm(Br)_2 xrig

  • 查看答案